EAC / EAEU Market Access
EAC certification for export to the EAEU
EAC Conformity for Dust Suppression Equipment
Identify mining or general industrial duty, dust type and water or mist system; document nozzle pressure, controls and safe work near moving machinery. Document the installation, mine environment, intended atmosphere and supplied safety systems. Check TR CU 012/2011 when equipment is intended for use in an explosive atmosphere; mine use alone does not establish the exact explosion-protection scope.
Quick compliance overview
- Product category
- Machinery & Equipment
- HS / TN VED
- 8421
- Assessment status
- Mine-specific certification; general industrial scope classified separately
What is usually required for this product?
Prepare the machine layout, model and configuration matrix, safety justification with risk assessment, operating and maintenance documents, control and safety-function description, identification label and applicable test evidence. Identify the complete line boundary and any independently supplied modules. Identify mining or general industrial duty, dust type and water or mist system; document nozzle pressure, controls and safe work near moving machinery.
Which conformity route applies?
The assessment identifies the machine type and hazards first, then checks the relevant list position, safety evidence and conformity route. Mine ventilation fans, mine belt or scraper conveyors and mining dust-collection or suppression equipment are covered by the respective certification entries of the presently applicable TR CU 010/2011 Annex 3. Identify the specific mine duty and listed equipment type before selecting the certification scheme. General industrial conveyors or gas-cleaning machinery have separate declaration entries.
Applicable technical regulations
Document the installation, mine environment, intended atmosphere and supplied safety systems. Check TR CU 012/2011 when equipment is intended for use in an explosive atmosphere; mine use alone does not establish the exact explosion-protection scope.
Verified conformity information
Decision No. 36 of 13 March 2026 mainly took effect on 1 September 2026; its replacement of Annex 3 takes effect on 1 April 2028. Use the presently applicable product list and check country-specific implementation and existing-document transition provisions for the project.
Cost and timeframe
Final cost and duration depend on the applicable regulation, conformity scheme, testing scope, technical documentation, sample requirements and project configuration.
- •Machine type and hazard profile
- •Number of models and configurations
- •Safety-function and testing scope
- •Quality of risk assessment and technical documentation
Documents usually requested
For an initial assessment, manufacturers should normally be ready to provide:
- Machine layout and principal drawings
- Safety/risk assessment
- Operating manual and maintenance instructions
- Drive, control and safety-system description
- Product datasheet and complete model list
- Manufacturer and production-site details
- Proposed HS / TN VED classification (8421)
EACSERT project support
More than a document-issuance service
We can manage the certification cycle from preparation for testing through final issuance, including development or adaptation of most of the technical documentation required for conformity assessment.
Related EACSERT experience
Large CO₂ production line certification project
A multi-stage industrial certification project lasting about two years and covering a large list of equipment within a CO₂ production line.
A large equipment scope required coordinated conformity assessment, technical documentation and work across multiple certification tasks rather than a single standard document.
Typical EAC conformity assessment process
The assessment identifies the machine type and hazards first, then checks the relevant list position, safety evidence and conformity route.
- 01
Identify the product and intended use
- 02
Check HS / TN VED and applicable EAEU regulations
- 03
Determine the required conformity route
- 04
Prepare technical and commercial documentation
- 05
Arrange samples, testing or production assessment where required
- 06
Issue/register the conformity document and confirm EAC marking
HS / TN VED code pages
Frequently asked questions
Why does the exact machine function matter?
Similar HS headings can contain machinery with different legal routes; function and listed product description must match.
Is a risk assessment normally important?
Yes. For machinery it is a core document for identifying hazards and demonstrating how safety measures are implemented.
Which EAC regulation applies to Dust Suppression Equipment?
Mine ventilation fans, mine belt or scraper conveyors and mining dust-collection or suppression equipment are covered by the respective certification entries of the presently applicable TR CU 010/2011 Annex 3. Identify the specific mine duty and listed equipment type before selecting the certification scheme. General industrial conveyors or gas-cleaning machinery have separate declaration entries.
Does the HS / TN VED code alone determine the route?
No. Customs classification is an important input, but the technical product description and the wording of the regulatory lists must be checked together.
Related products
Need an exact route for this product?
Send the product description, datasheet/manual and proposed HS / TN VED code. We will review the likely EAEU requirements and identify what is still needed for an exact quotation.
Get a free assessmentImportant: HS / TN VED codes and product names alone do not always determine the legal conformity route. Exact classification must consider product characteristics, intended use and current regulatory lists.