EAC / EAEU Market Access
EAC certification for export to the EAEU
EAC Certification for Glass Jars
For Glass Jars, material type, composition, intended use, contact conditions, performance class and any fire, hygiene or environmental properties can determine the applicable route. Within packaging, packaging material, food or non-food contact, product form, closure, reuse and transport function determine requirements. The exact model range, intended use, technical limits and differences between variants must be recorded before a firm route is stated. We cross-check the product description with TR CU 005/2011 and TN VED 7010, using the customs code as supporting evidence rather than as the only legal basis.
Quick compliance overview
- Product category
- Packaging
- HS / TN VED
- 7010
- Assessment status
- Verified regulatory mapping available
Registry intelligence
Preliminary EAC assessment
For Glass Jars, the verified regulatory mapping indicates an EAC Declaration under TR CU 005/2011 as the likely route. The item must be placed on the EAEU market as packaging or a closure and match the material and product description covered by TR CU 005/2011. Intended contents, direct contact, reusable or single-use design and special-purpose exclusions must be checked before the declaration route is confirmed.
- Likely conformity route
- EAC Declaration
- Confidence
- medium
- Likely regulation
- TR CU 005/2011
- HS / TN VED
- 7010
Preliminary registry statistics
Registry statistics are not available yet. Numerical data will appear only after a reproducible registry sample has been extracted.
This is a preliminary regulation-based assessment, not a final conformity determination. An EAC expert must verify the exact product description, design, intended use, technical parameters and current regulatory-list position before the route is confirmed.
What is usually required for this product?
The verified regulatory data links Glass Jars to TR CU 005/2011. Material composition, migration or hygiene tests, drawings and suitability for the intended contents should be demonstrated. Evidence should be tied to the supplied model and its worst-case characteristics rather than a broad commercial description. Material specification, composition, performance test data, intended application and labeling should be aligned before the route is confirmed. The final scope still depends on whether the supplied models and technical characteristics match the wording and conditions of the applicable regulatory list.
Certificate or declaration?
The verified mapping supports EAC declaration for products meeting the stated conditions. Confirm material and contact conditions before selecting migration, strength and marking checks. For Glass Jars, the review should also isolate the worst-case model characteristics. The assessment starts with material identity and intended application, then checks performance classes, testing and regulatory scope. This conclusion must not be extended to technically different products only because they share a similar name or HS heading.
Applicable technical regulations
Candidate regulations are shown for navigation only. Final classification depends on the exact product and current regulatory lists.
Verified conformity information
- TR CU 005/2011HS / TN VED: 7010Conformity form: declaration
The item must be placed on the EAEU market as packaging or a closure and match the material and product description covered by TR CU 005/2011. Intended contents, direct contact, reusable or single-use design and special-purpose exclusions must be checked before the declaration route is confirmed.
Cost and timeframe
Final cost and duration depend on the applicable regulation, conformity scheme, testing scope, technical documentation, sample requirements and project configuration.
- •Material structures, contact media and migration tests
- •Model differences and representative evidence selection
- •Material composition and grade range
- •Performance and safety test scope
- •Number of variants
- •Intended application and contact conditions
Documents usually requested
For an initial assessment, manufacturers should normally be ready to provide:
- Packaging material and intended-content specification
- Model-variant and worst-case characteristic matrix
- Material/product specification
- Composition or grade information
- Performance and safety test reports
- Intended-use and labeling information
- Product datasheet and complete model list
- Manufacturer and production-site details
- Proposed HS / TN VED classification (7010)
EACSERT project support
More than a document-issuance service
We can manage the certification cycle from preparation for testing through final issuance, including development or adaptation of most of the technical documentation required for conformity assessment.
Typical EAC conformity assessment process
Confirm material and contact conditions before selecting migration, strength and marking checks. For Glass Jars, the review should also isolate the worst-case model characteristics. The assessment starts with material identity and intended application, then checks performance classes, testing and regulatory scope.
- 01
Identify the product and intended use
- 02
Check HS / TN VED and applicable EAEU regulations
- 03
Determine the required conformity route
- 04
Prepare technical and commercial documentation
- 05
Arrange samples, testing or production assessment where required
- 06
Issue/register the conformity document and confirm EAC marking
HS / TN VED code pages
Frequently asked questions
What is the most useful first step for this product?
Send a complete datasheet and model matrix so the technical boundary can be fixed before regulatory conclusions are made.
Why is intended application important for materials?
A material can be regulated differently depending on where and how it is used.
Can one test report cover several grades?
Sometimes, if the grades are technically comparable and the representative-sample logic is justified.
Which EAC regulation applies to Glass Jars?
The current verified mapping points to TR CU 005/2011, subject to the stated product conditions and final technical review.
Does the HS / TN VED code alone determine the route?
No. Customs classification is an important input, but the technical product description and the wording of the regulatory lists must be checked together.
Related products
Need an exact route for this product?
Send the product description, datasheet/manual and proposed HS / TN VED code. We will review the likely EAEU requirements and identify what is still needed for an exact quotation.
Get a free assessmentImportant: HS / TN VED codes and product names alone do not always determine the legal conformity route. Exact classification must consider product characteristics, intended use and current regulatory lists.