EAC / EAEU Market Access
EAC certification for export to the EAEU
EAEU Compliance for Mine Locomotives
Use the actual model specifications and supply scope. Classification inputs: mine-transport role, propulsion, loads, braking, visibility and hazardous atmosphere. The procedure depends on the product function, materials, operating parameters, destination and regulatory exclusions. Check the current list and transition rules before choosing a scheme.
Mine Locomotives: Technical scope and market access
Parameters needed for classification
mine-transport role, propulsion, loads, braking, visibility and hazardous atmosphere.
Applicable procedure
Match the supplied equipment to its exact mining or mineral-processing function. The currently applicable TR CU 010/2011 certification list contains specified extraction, roadway development, mine transport, drilling, ventilation and dust-control equipment; general crushers, conveyors or process machinery can have declaration entries. Passive pressure components require a TR CU 032/2013 scope check, and intended explosive-atmosphere use requires separate TR CU 012/2011 assessment.
Documents and supply scope
Prepare the model list, intended-use statement, technical specifications, materials or formulation, design documents, labels and instructions. Select test reports, safety justification or sanitary evidence for the actual product. Distinguish independently supplied components from the complete product and identify the destination country and supply arrangement.
Decision No. 36 of 13 March 2026 mainly took effect on 1 September 2026; the replacement of Annex 3 takes effect on 1 April 2028. Check the presently applicable list and destination-country transition provisions.
Check the regulatory scope, exclusions, product lists and commencement and transition provisions before selecting the conformity form and scheme. HS / TN VED is a classification aid; it does not by itself determine certification, declaration, state registration or a national procedure.
Official sources
- EEC regulatory source 010
- EEC regulatory source 012
- EEC regulatory source 032
- Decision No. 36: commencement and transition
Check the current regulatory lists and applicable conditions for the project.
Quick compliance overview
- Product category
- Mining & Mineral Processing
- HS / TN VED
- 8601, 8602
- Assessment status
- Check product scope and procedure
What is usually required for this product?
Use the actual model specifications and supply scope. Classification inputs: mine-transport role, propulsion, loads, braking, visibility and hazardous atmosphere.
Which conformity procedure applies?
Match the supplied equipment to its exact mining or mineral-processing function. The currently applicable TR CU 010/2011 certification list contains specified extraction, roadway development, mine transport, drilling, ventilation and dust-control equipment; general crushers, conveyors or process machinery can have declaration entries. Passive pressure components require a TR CU 032/2013 scope check, and intended explosive-atmosphere use requires separate TR CU 012/2011 assessment.
Regulatory scopes to check
The procedure depends on the product function, materials, operating parameters, destination and regulatory exclusions. Check the current list and transition rules before choosing a scheme.
Conformity requirements
Match the supplied equipment to its exact mining or mineral-processing function. The currently applicable TR CU 010/2011 certification list contains specified extraction, roadway development, mine transport, drilling, ventilation and dust-control equipment; general crushers, conveyors or process machinery can have declaration entries. Passive pressure components require a TR CU 032/2013 scope check, and intended explosive-atmosphere use requires separate TR CU 012/2011 assessment.
Cost and timeframe
Final cost and duration depend on the applicable regulation, conformity scheme, testing scope, technical documentation, sample requirements and project configuration.
- •Machine type and hazard profile
- •Number of models and configurations
- •Safety-function and testing scope
- •Quality of risk assessment and technical documentation
Documents usually requested
For an initial assessment, manufacturers should normally be ready to provide:
- Machine layout and principal drawings
- Safety/risk assessment
- Operating manual and maintenance instructions
- Drive, control and safety-system description
- Product datasheet and complete model list
- Manufacturer and production-site details
- Proposed HS / TN VED classification (8601, 8602)
EACSERT project support
More than a document-issuance service
We can manage the certification cycle from preparation for testing through final issuance, including development or adaptation of most of the technical documentation required for conformity assessment.
Typical EAC conformity assessment process
The assessment identifies the machine type and hazards first, then checks the relevant list position, safety evidence and conformity route.
- 01
Identify the product and intended use
- 02
Check HS / TN VED and applicable EAEU regulations
- 03
Determine the required conformity route
- 04
Prepare technical and commercial documentation
- 05
Arrange samples, testing or production assessment where required
- 06
Issue or register the applicable document and confirm the required marking
HS / TN VED code pages
Frequently asked questions
Why does the exact machine function matter?
Similar HS headings can contain machinery with different legal routes; function and listed product description must match.
Is a risk assessment normally important?
Yes. For machinery it is a core document for identifying hazards and demonstrating how safety measures are implemented.
Which regulatory procedure applies to Mine Locomotives?
Match the supplied equipment to its exact mining or mineral-processing function. The currently applicable TR CU 010/2011 certification list contains specified extraction, roadway development, mine transport, drilling, ventilation and dust-control equipment; general crushers, conveyors or process machinery can have declaration entries. Passive pressure components require a TR CU 032/2013 scope check, and intended explosive-atmosphere use requires separate TR CU 012/2011 assessment.
Does the HS / TN VED code alone determine the route?
No. Customs classification is an important input, but the technical product description and the wording of the regulatory lists must be checked together.
Related products
Need an exact route for this product?
Send the product description, datasheet/manual and proposed HS / TN VED code. We will review the likely EAEU requirements and identify what is still needed for an exact quotation.
Get a free assessmentImportant: HS / TN VED codes and product names alone do not always determine the legal conformity route. Exact classification must consider product characteristics, intended use and current regulatory lists.