EAC / EAEU Market Access
EAC certification for export to the EAEU
EAEU Compliance for Safety Lanyards
Use the actual model specifications and supply scope. Classification inputs: fall-protection role, load, connections, energy absorption and user fitting. The procedure depends on the product function, materials, operating parameters, destination and regulatory exclusions. Check the current list and transition rules before choosing a scheme.
Safety Lanyards: Technical scope and market access
Parameters needed for classification
fall-protection role, load, connections, energy absorption and user fitting.
Applicable procedure
TR CU 019/2011 distinguishes class 1 PPE for lower risks, subject to declaration, from class 2 PPE protecting against risks of serious or irreversible harm, subject to certification. Match the declared protective function to Annex 4 and the relevant product requirements. Medical, firefighting or other excluded specialist products need their own scope review; material and product names alone do not establish the protection class.
Documents and supply scope
Prepare the model list, intended-use statement, technical specifications, materials or formulation, design documents, labels and instructions. Select test reports, safety justification or sanitary evidence for the actual product. Distinguish independently supplied components from the complete product and identify the destination country and supply arrangement.
Check the regulatory scope, exclusions, product lists and commencement and transition provisions before selecting the conformity form and scheme. HS / TN VED is a classification aid; it does not by itself determine certification, declaration, state registration or a national procedure.
Official sources
Check the current regulatory lists and applicable conditions for the project.
Quick compliance overview
- Product category
- Personal Protective Equipment
- HS / TN VED
- 5609, 6307
- Assessment status
- Check product scope and procedure
What is usually required for this product?
Use the actual model specifications and supply scope. Classification inputs: fall-protection role, load, connections, energy absorption and user fitting.
Which conformity procedure applies?
TR CU 019/2011 distinguishes class 1 PPE for lower risks, subject to declaration, from class 2 PPE protecting against risks of serious or irreversible harm, subject to certification. Match the declared protective function to Annex 4 and the relevant product requirements. Medical, firefighting or other excluded specialist products need their own scope review; material and product names alone do not establish the protection class.
Regulatory scopes to check
The procedure depends on the product function, materials, operating parameters, destination and regulatory exclusions. Check the current list and transition rules before choosing a scheme.
Conformity requirements
TR CU 019/2011 distinguishes class 1 PPE for lower risks, subject to declaration, from class 2 PPE protecting against risks of serious or irreversible harm, subject to certification. Match the declared protective function to Annex 4 and the relevant product requirements. Medical, firefighting or other excluded specialist products need their own scope review; material and product names alone do not establish the protection class.
Cost and timeframe
Final cost and duration depend on the applicable regulation, conformity scheme, testing scope, technical documentation, sample requirements and project configuration.
- •Materials and product variants
- •Age/user group and intended use
- •Testing scope for safety properties
- •Size/model range and labeling variants
Documents usually requested
For an initial assessment, manufacturers should normally be ready to provide:
- Material specification
- Model/size/age range
- Labeling and packaging artwork
- Safety or performance test reports if available
- Product datasheet and complete model list
- Manufacturer and production-site details
- Proposed HS / TN VED classification (5609, 6307)
EACSERT project support
More than a document-issuance service
We can manage the certification cycle from preparation for testing through final issuance, including development or adaptation of most of the technical documentation required for conformity assessment.
Typical EAC conformity assessment process
The review first fixes the intended user and product purpose, then checks materials, safety properties, labeling and family grouping.
- 01
Identify the product and intended use
- 02
Check HS / TN VED and applicable EAEU regulations
- 03
Determine the required conformity route
- 04
Prepare technical and commercial documentation
- 05
Arrange samples, testing or production assessment where required
- 06
Issue or register the applicable document and confirm the required marking
HS / TN VED code pages
Frequently asked questions
Does the intended user affect certification?
Yes. Children's, protective or body-contact products can have different requirements from ordinary consumer goods.
Can several sizes or models be grouped?
Often yes, when materials, design and safety characteristics are technically equivalent and the evidence covers the full range.
Which regulatory procedure applies to Safety Lanyards?
TR CU 019/2011 distinguishes class 1 PPE for lower risks, subject to declaration, from class 2 PPE protecting against risks of serious or irreversible harm, subject to certification. Match the declared protective function to Annex 4 and the relevant product requirements. Medical, firefighting or other excluded specialist products need their own scope review; material and product names alone do not establish the protection class.
Does the HS / TN VED code alone determine the route?
No. Customs classification is an important input, but the technical product description and the wording of the regulatory lists must be checked together.
Related products
Need an exact route for this product?
Send the product description, datasheet/manual and proposed HS / TN VED code. We will review the likely EAEU requirements and identify what is still needed for an exact quotation.
Get a free assessmentImportant: HS / TN VED codes and product names alone do not always determine the legal conformity route. Exact classification must consider product characteristics, intended use and current regulatory lists.