EAC / EAEU Market Access
EAC certification for export to the EAEU
EAEU Compliance for Pressure Separators
Use the actual model specifications and supply scope. Classification inputs: parameters of every chamber, process medium, internal partitions, relief and corrosion allowance. The procedure depends on the product function, materials, operating parameters, destination and regulatory exclusions. Check the current list and transition rules before choosing a scheme.
Pressure Separators: Technical scope and market access
Parameters needed for classification
parameters of every chamber, process medium, internal partitions, relief and corrosion allowance.
Applicable procedure
TR CU 032/2013 applies when the pressure equipment's medium, pressure, volume or diameter and exclusions bring it within scope. Equipment category and the actual supply determine declaration or certification; the rules distinguish categories 1–2 and 3–4 and include special provisions for site-completed assemblies. Assess every pressure chamber and independently supplied element; driven machinery, burners and explosive-atmosphere use can require separate regulatory checks.
Documents and supply scope
Prepare the model list, intended-use statement, technical specifications, materials or formulation, design documents, labels and instructions. Select test reports, safety justification or sanitary evidence for the actual product. Distinguish independently supplied components from the complete product and identify the destination country and supply arrangement.
Decision No. 36 of 13 March 2026 mainly took effect on 1 September 2026; the replacement of Annex 3 takes effect on 1 April 2028. Check the presently applicable list and destination-country transition provisions.
Check the regulatory scope, exclusions, product lists and commencement and transition provisions before selecting the conformity form and scheme. HS / TN VED is a classification aid; it does not by itself determine certification, declaration, state registration or a national procedure.
Official sources
Check the current regulatory lists and applicable conditions for the project.
Quick compliance overview
- Product category
- Pressure Equipment
- HS / TN VED
- 8421, 8419
- Assessment status
- Check product scope and procedure
What is usually required for this product?
For a pressure-rated separator, provide the design and operating pressures, temperature, volume, media and fluid groups, drawings and protection arrangements. The conformity category follows the actual pressure boundary and operating conditions.
Which conformity procedure applies?
TR CU 032/2013 applies when the pressure equipment's medium, pressure, volume or diameter and exclusions bring it within scope. Equipment category and the actual supply determine declaration or certification; the rules distinguish categories 1–2 and 3–4 and include special provisions for site-completed assemblies. Assess every pressure chamber and independently supplied element; driven machinery, burners and explosive-atmosphere use can require separate regulatory checks.
Regulatory scopes to check
The procedure depends on the product function, materials, operating parameters, destination and regulatory exclusions. Check the current list and transition rules before choosing a scheme.
Conformity requirements
TR CU 032/2013 applies when the pressure equipment's medium, pressure, volume or diameter and exclusions bring it within scope. Equipment category and the actual supply determine declaration or certification; the rules distinguish categories 1–2 and 3–4 and include special provisions for site-completed assemblies. Assess every pressure chamber and independently supplied element; driven machinery, burners and explosive-atmosphere use can require separate regulatory checks.
Cost and timeframe
Final cost and duration depend on the applicable regulation, conformity scheme, testing scope, technical documentation, sample requirements and project configuration.
- •Pressure-equipment category
- •Design pressure, volume or nominal diameter
- •Working medium and fluid group
- •Strength calculations, tests and technical dossier completeness
Documents usually requested
For an initial assessment, manufacturers should normally be ready to provide:
- General arrangement and pressure-boundary drawings
- Design pressure/temperature and medium data
- Strength calculations and material specifications
- Safety devices and test documentation
- Product datasheet and complete model list
- Manufacturer and production-site details
- Proposed HS / TN VED classification (8421, 8419)
EACSERT project support
More than a document-issuance service
We can manage the certification cycle from preparation for testing through final issuance, including development or adaptation of most of the technical documentation required for conformity assessment.
Related EACSERT experience
Large CO₂ production line certification project
A multi-stage industrial certification project lasting about two years and covering a large list of equipment within a CO₂ production line.
A large equipment scope required coordinated conformity assessment, technical documentation and work across multiple certification tasks rather than a single standard document.
Typical EAC conformity assessment process
The assessment first determines whether the product falls within pressure-equipment scope and which category applies; only then is the conformity procedure fixed.
- 01
Identify the product and intended use
- 02
Check HS / TN VED and applicable EAEU regulations
- 03
Determine the required conformity route
- 04
Prepare technical and commercial documentation
- 05
Arrange samples, testing or production assessment where required
- 06
Issue or register the applicable document and confirm the required marking
HS / TN VED code pages
Frequently asked questions
Which parameters decide the pressure-equipment category?
The decisive inputs include pressure, volume or nominal diameter, medium and fluid group, together with the regulation's scope rules.
Can the HS code determine the pressure category?
No. The code helps identify the product, but the legal category is parameter-based.
Which regulatory procedure applies to Pressure Separators?
TR CU 032/2013 applies when the pressure equipment's medium, pressure, volume or diameter and exclusions bring it within scope. Equipment category and the actual supply determine declaration or certification; the rules distinguish categories 1–2 and 3–4 and include special provisions for site-completed assemblies. Assess every pressure chamber and independently supplied element; driven machinery, burners and explosive-atmosphere use can require separate regulatory checks.
Does the HS / TN VED code alone determine the route?
No. Customs classification is an important input, but the technical product description and the wording of the regulatory lists must be checked together.
Related products
Need an exact route for this product?
Send the product description, datasheet/manual and proposed HS / TN VED code. We will review the likely EAEU requirements and identify what is still needed for an exact quotation.
Get a free assessmentImportant: HS / TN VED codes and product names alone do not always determine the legal conformity route. Exact classification must consider product characteristics, intended use and current regulatory lists.